Dindindin Magnet Mai Aiki tare da Injin Gogayya mara Gear THY-TM-K300
| Wutar lantarki | 380V |
| Roping | 2:1/4:1 |
| Birki | DC110V 2×1.6A |
| Nauyi | 520kg |
| Load Max.Static | 6000kg |
1.Saurin Isarwa
2.Ma'amala shine farkon farawa, sabis ɗin baya ƙarewa
3.Type: Na'ura mai ɗaukar hoto THY-TM-K300
4.Zamu iya samar da injunan haɗakarwa da injunan haɗakarwa na TORINDRIVE, MONADRIVE, MONTANARI, FAXI, SYLG da sauran samfuran.
5. Amintacciya ita ce farin ciki! Ba zan taba kasawa amanar ku ba!
Zane da kuma samar da THY-TM-K300 Magnet Magnet synchronous gearless lif gogayya gogayya inji cika da "GB7588-2003-Lambar Tsaro don Elevator Manufacturing da Shigarwa", "EN81-1: 1998-Dokokin Tsaro don Gina Gina da Shigarwa", "GB/ The 4 da suka dace Machine a T2.0 Ƙirar rayuwa na injin ɗin ya cika ka'idodin aiki (shekara 1 ko kamar yadda ake buƙata), ana buƙatar ƙara man shafawa, kuma babu buƙatar ƙara ko maye gurbin mai don ƙararrawa, da fatan za a bi buƙatun allura kamar haka: Da fatan za a yi allurar Mobil Grease XHP222 (NLGI 2 grade) don samar da Gall 2 kafin babban injin da aka yi a10. (V220C 2 grade) don babban injin tare da kwanan wata samarwa bayan 2018. Ya dace da lif tare da ɗakin injin da lif ba tare da ɗakin injin ba. 450mm da 480mm Ya dace da yanayin aiki na cikin gida.
• Daidaita tazarar birki (tazarar da ke tsakanin static plate da farantin mai motsi), tazarar birki ba ta kai 0.1mm lokacin da aka sa shi ba, kuma yana da kusan 0.25 ~ 0.4mm idan an sake shi.
• Yi amfani da ma'auni na 0.3 don duba tazarar iska na kusurwar birki: idan tazarar iska bai wuce 0.3mm ba, sai a sassauta abin da ke hawa a wannan kusurwar a kan agogo, sa'an nan kuma jujjuya ƙunƙun kusa da agogo a ƙaramin kusurwa, sa'an nan kuma ƙara matsawa.
• Yi amfani da ma'auni na 0.35mm don bincika tazarar iska mai kusurwa: lokacin da tazarar iska ta fi 0.35mm, sassauta ƙusa mai hawan kusurwa a kan agogo, sa'an nan kuma juya maɗaukaki mai zurfi a kusa da agogo a ƙaramin kusurwa, sa'an nan kuma ƙara matsawa.
• Daidaita tazarar duk sasanninta na birki don tabbatar da cewa ma'aunin jigon 0.3mm zai iya wucewa, kuma ma'aunin ji na 0.35mm ba zai iya wucewa ba.
•Lokacin da aka kunna birki, yi amfani da ma'auni mai jigon 0.08mm don bincika keɓewar ƙafar tsakanin ƙafafun birki da kushin birki. Lokacin da izinin bai wuce 0.08mm ba, maimaita hanyar daidaita birki, kuma daidaitawa don tabbatar da cewa izinin ƙafar ≥0.08mm.
• Cire murfin saman birki kuma daidaita toshe daidaitawar micro switch ta yadda lokacin da aka buɗe / rufe birki, za'a iya dogaro da buɗewa / rufe micro switch, kuma ana sake saita murfin bayan daidaitawa.
a. Yi amfani da maɓallin Allen na 3mm don cire murfin baya mai ƙura.
b. Sake faɗaɗa dunƙule na zoben waje na encoder tare da maɓallin Allen 2mm.
c. Sauke dunƙule M5 (juyawa 2 ~ 4) don ƙarfafa mai rikodin tare da maɓallin Allen 4mm.
d. Yi amfani da maɓallin Allen 8mm don dunƙule a cikin dunƙule M10 don fitar da encoder.
e. Riƙe rikodin da hannunka kuma cire shi a hankali kuma sanya shi a wuri mai aminci.
a. Yi amfani da maɓallin Allen na 3mm don cire murfin baya mai ƙura.
b. Ƙarfafa maɓalli na M5 mai hawa dunƙule (ƙarfin ƙarfi 5+0.5Nm) tare da maɓallin Allen 4mm.
c. Yi amfani da maɓallin Allen na mm 2mm don ƙara ƙara dunƙule dunƙule na zoben waje na encoder (ƙarfin kullewa 1.25-0.2Nm).
d. Yi amfani da maɓallin Allen 3mm don ƙara ƙarar murfin baya mai ƙura (ƙarfin kulle 5+0.5Nm).
